Adjusting The Line (Headset) Audio Level And The Microphone Input Level - Sony RSE-500 Operating Instructions Manual

You can set the answering mode to receive an
incoming call automatically or manually.
1 Select 32. ANSWERING MODE from the
SETTING menu.
The following screen appears.
[
ANSWERING MODE
AUTO] MANUAL
<CANCEL> «OK»
L-
2 Select AUTO or MANUAL using € or *.
The selected setting becomes highlighted.
AUTO: Receives an incoming call automatically.
MANUAL: Before receiving an incoming call,
the message "There is an incoming video
call..." appears on the monitor. If you want to
receive that call, press ENTER.
3 Move the cursor to «OK» using +, then press
ENTER.
The setting is registered and the SETTING menu
appears.
This section describes the basic settings of the Video
Transmitter.
Adjusting the Line (Headset)
Audio Level and the Microphone
Input Level ie
You can register the line (headset) audio level and
microphone input level in the HIGH and the LOW
positions.
If you set AUDIO to OFF, the capacity allocated to the
audio signal is allocated to the video signal. In this
case. the picture quality improves.
1 Select 12. AUDIO MIC LEVEL from the
SETTING menu.
The following screen appears.
AUDIO :[(ON OFF
AUDIO LEVEL HIGH:25
LOW: 16
MIC LEVEL HIGH:25
LOW: 16
<CANCEL> «OK»
—
2 Select ON or OFF using € or », then press Y.
3 Adjust the audio level in the HIGH position using
€or».
You can adjust the audio level between 01 and 32.
4 Move the cursor to AUDIO LEVEL LOW using ¥,
then adjust the audio level in the LOW position
using € or ».
You can adjust the audio level between 01 and 32.
You can adjust the microphone input level between
01 and 32.
6 Move the cursor to MIC LEVEL LOW using y,
then adjust the microphone input level in the LOW
position using € or ».
You can adjust the microphone input level between
01 and 32.
z Ja1deyo