Selecting The Picture; Stopping The Camera Auto Scan; Temporarily - Sony RSE-500 Operating Instructions Manual

electing the Picture |
can select which pictures are displayed from the
eras connected to the VIDEO IN (1 — 8)
iectors or EXT VIDEO IN (9 — 256) connectors.
can select the picture from either the local site or
emote site.
witching the Pictures
lo select a picture at the local site, select LOCAL
ZAM SEL from the main menu.
To select a picture at a remote site, select
REMOTE CAM SEL.
The following screen appears. (The illustration
delow is for selecting LOCAL CAM SEL.)
-—-LOCAL CAMERA SELECT——
NO: £00Í1))
0123456789 B
<CANCEL> «OK»
Select the camera number you want to display on
he monitor using € or », then press ENTER one
»y one.
The selected camera number is entered in the
number box.
Move the cursor to «OK» using ¥, then press
ENTER.
The picture of the selected camera is displayed.
cannot select a number greater than the total
era number set in the 8. CAMERA setting.
Switch the pictures with the Remote
mmander
is the CAMERA key and select the camera number
1 the number keys.
Stopping the Camera Auto Scan
Temporarily >
You can stop the camera auto scan temporarily.
For details on the camera auto scan, see "Switching
Pictures Automatically" on page 2-14 (EN).
1 Select REMOTE PAUSE from the main menu.
The current setting is displayed in the lower-left
corner of the main menu.
2 Press ENTER.
Each time you press ENTER, the setting is
changed between ON and OFF.
MENU LOCAL REMOTE
OFF ALARM ALARM
CAM SEL CAM SEL
DIAL CAM CTR CAM CTR
LIST. P 1/0 P 1/0
KEY... INFO... PAUSE
DISC. HEADSET LINE
MIC MIC
SETTING PinP PICTURE
BUSY
Current setting ——+ OFF
ON: Disable camera auto scan.
OFF: Enable camera auto scan.
N
e sajdeyo
DELE RODEAR IL IA RA
+