Naming The Video Transmitter; Registering The Telephone Number And Subaddress Oo - Sony RSE-500 Operating Instructions Manual

Before you use the Video Transmitter, register a site
name and telephone number. You can also set a
password to deny access to general calling parties
other than specific calling parties.
Naming the Video Transmitter (ID
Name)
An ID name is used only in system management for
commenting purposes. It is not used for
communication among Video Transmitter units.
1 select 1. ID NAME from the SETTING menu.
The following screen appears.
ID NAME: [kkk KKKKX]
(0123456789
ABCDEFGH! JKLMNOP
ORSTUUWKYZ
abcdefshijklmnor
arstuvuxyz
I^8$5& Oxt.-.:: |
€2»5?8[N^ 16) 1x/ NO
SP B5
«CANCEL? «OK»
5222
2 Select characters for the ID name using €, 4, » or
Y, then press ENTER character by character.
The selected characters are entered in the ID name
box.
* The ID name can be up to 10 characters long.
* Select SP for a space.
* An asterisk is displayed where nothing is entered.
3 After entering the ID name, move the cursor to
<OK> using ¥, then press ENTER.
The ID name is registered and the SETTING menu
appears.
Registering the Local Site Information
Naming the Video Transmitter
(Site Name)
The site name registered at your own site is displayed
in the remote site monitor.
1 Select 2. SITE NAME from the SETTING menu.
The following screen appears.
mg NAME :
[ok KKK AK KKK KK KK KEKKEKK]
"10123456789
ABCDEFGHI JKLMNOP
ORSTUUWXYZ
abcdefshijklmnop
arstuvuxyz
I"H$Z&' Oxt.-. 54
«2»?8[lN^ 1G Tx/NO
SP Bs
«CANCEL»? «OK»
2 Press ¥ and select the characters for the site name
using €, 4. ** or Y, then press ENTER character
by character.
The selected characters are entered in the site name
box.
* The site name can be up to 20 characters long.
* Select SP for a space.
* An asterisk is displayed where nothing is entered.
3 After entering the site name, move the cursor to
«OK» using *. then press ENTER.
The site name is registered and the SETTING
menu appears.
Registering the Telephone
Number and Subaddress
1 Select 3. TELEPHONE # from the SETTING
menu.
The following screen appears.
TELEPHONES — ———
COUNTRY CODE: [xxx]
0123456789 E
<CANCEL> <OK>
AU
z 19)deu?