Selecting The Information To Display On The - Sony RSE-500 Operating Instructions Manual

"ou can display an inset window or character
formation on the monitor.
Changing the Position of the
Inset Window (Picture-in-Picture)
Jormally, the monitor displays the picture sent from a
emote site. You can display the picture sent from the
ocal site to a remote site in an inset window.
| Select LOCAL PinP from the main menu.
The current position setting is displayed in the
lower-left corner of the main menu.
m |
MENU LOCAL REMOTE
OFF ALARM ALARM
CAM SEL CAM SEL
DIAL CAM CTR CAM CTR
LIST. P I/O P 1/0
KEY... INFO... PAUSE
DISC.. HEADSET LINE
MIC MIC
SETTING PinP PICTURE
BUSY
Current position OFF
setting
2 Press ENTER.
Each time you press ENTER, the inset window
setting is changed as follows.
OFF — (=) — [al — a) 5
s
: The inset window is displayed in the upper-
right corner.
[=] : The inset window is displayed in the lower-
right corner.
im |: The inset window is displayed in the lower-
left corner.
iw | : The inset window is displayed in the upper-
left corner.
OFF: The inset window is not displayed.
Note |
The local site picture displayed in the inset window is
a mirrored image.
Selecting the Information to
Display on the Monitor
You can superimpose the following information on the
on-line monitor.
1 Select LOCAL INFO from the main menu.
The following screen appears.
INFORMATION
¡NAME /ON| OFF
DATE: ON; OFF
TIME ¡ON| OFF
CAMERA DON. OFF
POSITION UPPER: LOUER
<CANCEL >| «OK»?
2 Select ON or OFF using €, f, » or ¥, then press
+.
The cursor moves down to the next line.
3 After setting all items, move the cursor to <OK>
using y.
4 Press ENTER.
The information display ts set and the main menu
appears.
To display the site name
Select ON next to NAME.
To display the date
Select ON next to DATE.
To display the time
Select ON next to TIME.
To display a camera number
Select ON next to CAMERA 5.
To select the position to display the
information
Select UPPER or LOWER next to POSITION.
€ 19)deu?
ILU
Yi