Input Level; Changing The Input Level Of The Microphone Of The Local Site; Changing The Input Level Of The Microphone - Sony RSE-500 Operating Instructions Manual

co Illi
You can change the headset volume and the
microphone input level out of two settings or mute the
sound.
For details on 12. AUDIO MIC LEVEL, see "Adjusting Line
(Headset) Audio Level and Microphone Input Level" on
page 2-7 (EN).
Changing the Headset and Line
Volume of the Local Site
1 Select LOCAL HEADSET from the main menu.
The current volume setting is displayed in the
lower-left corner of the main menu.
MENU LOCAL REMOTE
OFF ALARM ALARM
CAM SEL CAM SEL
DIAL CAM CTR CAM CTR
LIST. P 1/0 P 1/0 i
KEY... INFO... PAUSE
DISC. (HEADSET, LINE
MIC MIC |
SETTING PinP PICTURE
. BUSY i
Current setting d»
2 Press ENTER.
Each time you press ENTER, the volume setting is
changed as follows.
gp — OFF => c
£5, : The volume is set to the HIGH position level
set in 12. AUDIO MIC LEVEL.
LJ) : The volume is set to the LOW position level
set in 12. AUDIO MIC LEVEL.
OFF: Sound is muted.
* The headset sound is monaural.
* If you set AUDIO to OFF in the 12. AUDIO MIC
LEVEL setting, no sound is output depending on
whether you select 2 . or".
Changing the Headset and Line
Volume of the Remote Site
1 Select REMOTE LINE from the main menu.
The current volume setting is displaved in the
lower-left corner of the main menu.
2 Press ENTER.
Each time you press ENTER, the volume setting is
changed as follows.
[^ D > OFF => aj ]
=: The volume is set to the HIGH position level
set in 12. AUDIO MIC LEVEL.
- +: The volume is set to the LOW position level
set in 12. AUDIO MIC LEVEL.
OFF: Sound ts muted.
Changing the Input Level of the
Microphone of the Local Site
1 Select LOCAL MIC from the main menu.
The current input level setting 1s displayed in the
lower-left corner of the main menu.
2 Press ENTER.
Each time you press ENTER, the input level
setting is changed as follows.
=> OFF => 13)
X: The input level is set to the HIGH position
level set in 12. AUDIO MIC LEVEL.
=. + The input level is set to the LOW position
level set in 12. AUDIO MIC LEVEL.
OFF: No sound ts input.
Changing the Input Level of the |
Microphone of the Remote Site
1 Select REMOTE MIC from the main menu.
The current input level setting is displayed in the
lower-left corner of the main menu.
2 Press ENTER.
Each time you press ENTER, the input level
setting is changed as follows.
= => OFF i)
Lo o: The input level is set to the HIGH position
level set in 12. AUDIO MIC LEVEL.
>: The input level is set to the LOW position
level set in 12. AUDIO MIC LEVEL.
OFF: No sound is input.