Start-Up Troubleshooting - U-Line Echelon BI-2115 Installation Manual

Echelon series

Hide thumbs Also See for Echelon BI-2115:

Table of Contents

Start-Up Troubleshooting

Problem

Unit does not appear to turn on when switch is set to ON.

Solution

Make sure unit is plugged in and outlet has power (circuit

breaker has not tripped). Remember that the ice maker

mechanism will not fill the mold with water until the

mold reaches the proper temperature.

Problem

Water does not appear to be flowing into unit.

Solution

Check that the water is connected and turned on and the

line is not obstructed.

Problem

Ice cubes produced during the first two to three hours of

operation have been discarded. New cubes still appear

cloudy.

Solution

This is normal and is caused by air being trapped in the

cube during fast freezing.

IMPORTANT

See the Use and Care Guide's Troubleshooting Guide for