Start-Up Troubleshooting - U-Line BI-2015 Installation Manual

Start-Up Troubleshooting

Q:
Problem
Unit does not appear to turn on when switch is set to ON.
A:
Solution
Make sure unit is plugged in and outlet has power (circuit
breaker has not tripped). Remember that the ice maker
mechanism will not fill the mold with water until the
mold reaches the proper temperature.
Q:
Problem
Water does not appear to be flowing into unit.
A:
Solution
Check that the water is connected and turned on and the
line is not obstructed.
Q:
Problem
Ice cubes produced during the first two to three hours of
operation have been discarded. New cubes still appear
cloudy.
A:
Solution
This is normal and is caused by air being trapped in the
cube during fast freezing.
IMPORTANT
See the User Manual's Troubleshooting Guide for more
solutions.
www.U-LineService.com
BI2015 — Ice Maker
16
™
02/2005