Full Overlay Door Panel Door Panel Preparation A full overlay door panel completely covers the doorframe and handle to give a built-in appearance. See your U-Line dealer for the optional Full Overlay Door Panel Kit. 2175 Models: P/N U-OL2175B -- Black P/N U-OL2175W -- White 2115 &...
Page 3
Installation Instructions Removing Existing Door 1. Remove the door shelves by first pulling shelves up at a 45° angle, then straight out. 2. Remove top hinge screw pin (Phillips screwdriver). Remove the door by tilting forward and lifting off the bottom hinge pin.
Door Panel Typical Wood Panel Plastic Spacer Seven Required Figure 7 4. Remove the existing bottom pivot plate and replace with the Full Overlay pivot plate (see Figure 8). Existing Door Existing Bottom Pivot Plate (Remove and Discard) Figure 8 IMPORTANT Door panel and overlay panel must be aligned properly or the door will not operate correctly.
Existing Door Door Closure Top Boss Door Closure Bottom #8-32 x 1/2" Flat Head Screw Boss Pivot Post Wood Panel Bottom Hinge Plate (5/8" Longer than Existing Bottom Hinge Plate) Figure 12 IMPORTANT Pivot posts must be cleaned. Closers must also be clean and greased to ensure proper operation.
Page 6
Inserts Figure 16 For more than four decades, U-Line has distinguished itself as the leader in built-in undercounter ice making, refrigeration and wine storage appliances. U-Line Corporation, located in Milwaukee, WI, is a family operated manufacturer of built-in undercounter icemakers, Combo refrigerators, refrigerated drawers and refrigerator/freezers.
Need help?
Do you have a question about the Echelon 2115R and is the answer not in the manual?
Questions and answers