A Look At The Display - Radio Shack REALISTIC PRO-2042 Owner's Manual

A LOOK AT THE DISPLAY
TUNE
AUTO
SCAN MaSEARCHBANKj.iii^^i^^i0
SEARCH iT
P 1000
10 00 0 00 n
30kHz
PRIORITY
MON IO O
0
CH
10 U U.U U U 8
MHz30kH
PROGRAM LOCK-OUT DELAY AM NFM WFM 12.50kHz
The display has indicators that show
the scanner's current operating mode.
A good look at the display will help you
understand your scanner.
SCAN — appears when you scan
channels.
MANUAL — appears when you manu¬
ally select a channel.
SEARCH — appears during a direct
search and a limit search.
PRIORITY — appears when the pri¬
ority feature is turned on.
PROGRAM — appears when you press
PROGRAM while selecting a channel to
store a frequency in, or while selecting
a search bank.
WX — appears when you scan the ten
preprogrammed weather band chan¬
nels. The weather band channels are
not available in the U.K.
A and ▼ — appear when the scan¬
ner is scanning, when you press ^
and v while the scanner is doing a
limit or direct search, when you tune
through weather channels, or when
you store frequencies.
MON — appears with a number (1-100)
to show which monitor memory you
are listening to.
P — appears when the scanner is set
to the priority channel.
SEARCH BANK — appears with num¬
bers (1-10). Numbers with a bar under
them show which search banks are
turned on for a limit search.
BANK — appears with numbers (1-10).
Numbers with a bar under them show
which channel-storage banks are
turned on for scanning. See "Under¬
standing Banks/Memories" on Page
17.
CH — appears with a number (1-1000)
to show which of the scanner's 1,000
channels it is tuned to.
LOCK-OUT — appears when you lock
out a channel or frequency.
15