Radio Shack REALISTIC PRO-2042 Owner's Manual page 16

MHz
— appears with digits to show
which frequency your scanner is cur¬
rently tuned to.
DELAY — appears when scanning
stops at a channel you have pro¬
grammed for a 2-second delay.
AM
— appears when the scanner
scans a frequency set to the AM mode
or when you change a frequency to the
AM mode. See "Band Mode and Fre¬
quency Step" on Page 35.
NFM — appears when the scanner
scans a frequency set to the narrow-
band FM mode, or when you change a
frequency to the narrowband FM
mode. See "Band Mode and Frequen¬
cy Step" on Page 35.
wfm — appears when the scanner
scans a frequency set to the wideband
FM mode, or when you change a fre¬
quency to the wideband FM mode.
See "Band Mode and Frequency Step"
on Page 35.
TUNE — appears when you press
TUNE to use the scanner's rotary tuner.
auto — appears when the scanner
automatically stores frequencies into
channels.
kHz
— appears with digits to show
which frequency step (5, 12.5, or 50)
the scanner is set to.
-d-
— appears instead of the chan¬
nel number during a direct search.
Error
— appears when you make an
invalid entry.
Sor.
— appears when the scanner
sorts frequencies. See "Sorting Fre¬
quencies Within a Bank" on Page 30.
A-FULL
— appears when you select
a full bank, or when you finish sorting
a full bank. See "Automatically Storing
Frequencies" on Page 20.
AC — appears with a number to show
the number of empty channels in a
bank.
dUPL
— briefly flashes when you try
to program a duplicate frequency
within a channel. See "Manually
Storing Frequencies" on Page 20.
16