A Look At The Display - Radio Shack PRO-67 Operation

A LOOK AT THE DISPLAY

The display has indicators that show the scanner's current operating mode.
A good look at the display will help you understand how to operate your
scanner.
L-OUT/S/S - lets you lock out a selected
KEYLOCK/ - locks the keypad to prevent
DELAY - programs a 2-second delay for
Down and Up Arrow - enter the down or up search
Number Keys - each key has a single digit,
CLEAR/. - erases an incorrect entry or an
0/HOLD - enters the number 0; pauses the
E - enters the frequency when you
MON - appears during search modes or
BATT.Lo - flashes when the battery is low.
K/L - appears when you lock the
channel; skips a specified
frequency during a limit, direct
or service search.
accidental program changes;
turns on the display light for
15 seconds.
the selected channel.
direction.
with a range of numbers printed
above it. The single digits
refer to the number of a channel
or frequency entered.
of numbers (21-40, for example)
indicates the channels that make
up a memory bank.
keys 1-4 are used as the air
traffic (AIR), marine traffic
(MRN), fire department activity
(FIRE), and weather reporting
(WX) band keys.
error; enters the decimal point
in a frequency.
frequency search.
program channels.
when you listen to a monitor
memory. The number to the right
of this indicator shows the
current monitor memory number.
keypad.
The range
Also, number