Radio Shack REALISTIC PRO-2042 Owner's Manual page 10

If the scanner still does not work pro¬
perly, you might have to reset it.
Caution: This procedure clears all the
information you have programmed into
the scanner. Use this procedure only
when you are sure your scanner is not
working properly.
1. Use OFF/VOLUME to turn off the
scanner, then turn it on again.
2. Press and hold down CLEAR.
3. While inserting a pointed object
such as a straightened paper clip
into the RESTART hole on the back
of the scanner, press it until the
information on the display disap¬
pears. Then release it.
4. After the information reappears on
the scanner's display, release
CLEAR.
10