A Look At The Display - Radio Shack Race Scanner Owner's Manual

A LOOK AT THE DISPLAY

The display has indicators that show the scanner's current operating
status. A good look at the display will help you understand how your
scanner operates.
BANK — appears with numbers (1–10) to show which memory banks
are turned on for scanning.
Service bank indicators — appear when you select the scanner's ser-
vice banks (see "Service Banks" on Page 21).
— flashes when the batteries are low.
BATT.Lo
K/L — appears when you lock the keypad.
— appears when you store car numbers and frequencies in the
RACE
scanner's channels, add and delete frequencies from car numbers, dis-
play car numbers, and move to the channel where a car number is
stored.
— appears when you set the scanner to scan the priority channels
PRI
every 2 seconds.
DATA — appears when you turn on the data skip function.
HOLD — appears during a search hold.
WX — appears when you search the preset frequencies in the weather
band.
— appears when you are using Hypersearch during service
HYPER
bank and direct search. However,
ner searches any frequency bands other than the 5 kHz step bands.
BANK 1 2 3 4 5 6 7 8 9 10 BATT.Lo K / L
RACE PRI DA TA HOLD
NO.
P
MR N
CH
SCAN MA N PG M
W X
HYPER
M H z
S
SEARCH
L/ O
disappears when the scan-
HYPER
19