Installation; Installation Overview - TurboChef HHC-3240 Installation Manual

2

INSTALLATION

Installation Overview

Before installing the HhC 3240 oven, thoroughly read this manual, familiarize yourself with the installation
procedures, and check with the local code enforcement for any unforseen requirements needed for the instal-
lation
(refer to the regulations in force in the country in which the appliance is being installed)
for the oven, select electricians and plumbers who are qualifi ed to make all connections per national and local
building codes
experience installing conveyor ovens and food service equipment. Several days before the installation, a site
visit should be conducted to ensure that all electric, gas, and ventilation utilities are of adequate size and ready
for use before the installation occurs, and that a restraint device is available to guard against strain to utility
connections.
NOTE: Thoroughly inspect the oven for freight damage as soon as it arrives. Immediately note any damage
and contact the shipping company within 24 hours in order to fi le a claim. TurboChef is not responsible if
the product is damaged in shipment.
Required/Replacement Parts
-103572
-103576
-HHC-6137
-HHC-6614
-HHC-6561-1 Conveyor, Standard (L to R)
-HHC-6561-2 Conveyor, Standard (R to L)
-HHC-6661-1 Conveyor, 50/50 (L to R)
-HHC-6661-2 Conveyor, 50/50 (R to L)
-HHC-6662-1 Conveyor, 70/30 (L to R)
-HHC-6662-2 Conveyor, 70/30 (R to L)
-HHC-6374
-HHC-6464
-HHC-6525
-HHC-6463
-HHC-6524
-HHC-6574
-HHC-6575
-HHC-6411
-HHC-6850-26 Leg kit for single oven
-HHC-6850-20 Leg kit for single or double oven
-HHC-6850-14 Leg kit for double or triple oven
-103588
-HHC-6400
-HHC-6391
-HHC-6591
-HHC-6624
-HHC-6632
(refer to the regulations in force in the country in which the appliance is being installed)
8" (203.2mm) gas pipe (1 for
double oven, 2 for triple oven)
10" (254mm) gas pipe
Burner compartment cover
Chain, conveyor
Cooling tube
Cover, left, lower
Cover, left, upper
Cover, right, lower
Cover, right, upper
Crumb tray kit for single or base
oven
Crumb tray kit for middle or top
oven
Guard, chain
Levelers (x4)
Shelf, Conveyor
Stacking bracket (x2 for double,
x4 for triple)
Window
Window bracket (x2)
Window handle
Required Hardware
-102949 Bolts for legs (x16) - 3/8-16 x 3/4"
serrated hex washer head
-102949 Bolts to replace maneuvering
casters and fi ll back wall holes (x8)-
3/8-16 x 3/4" serrated hex washer
head
-101696 Burner compartment cover screws
(x4) - #8 x 3/8" phillips pan head
-101752 Cooling tube screw - 1/4-20 x 1/2"
thumb screw
-101392 Lifting bracket replacement screws
(x4) - 1/4-20 x 1/2" phillips fl at
head
-102949 Stacking bracket bolts (x8 for
double, x16 for triple) - 3/8-16 x
3/4" serrated hex washer head
-101392 Window bracket screws (x2) -
1/4-20 x 1/2" philips fl at head
Required Equipment and Tools
-Phillips head screw driver
-Standard english socket set
-Straight blade screw driver
-Thread sealing compound
-Lifts and adapters (x2 HHC-6616)
-Lifting pole (10 feet [3.05m] long, 1.5 inch
[38.1 mm] diameter, schedule 40 steel)
-Safety pins or pipe caps (x2)
WARNING: For safety, use safety pins or pipe
caps when lifting the oven.
NOTE: Leg kits include levelers.
NOTE: Conveyor assemblies include chain guard.
NOTE: Crumb tray kits include a convyor shelf.
. To set up connections
, and have