Ozito IDP-2000 Instruction Manual

Ozito IDP-2000 Instruction Manual

Electric air pump

Advertisement

Quick Links

MAINTENANCE

WARNING:
BEFORE ClEANING OR CARRyING Out
ANy mAINtENANCE PROCEDuRE, ENSuRE thE uNIt
IS SWItChED OFF, DISCONNECtED FROm thE POWER
SuPPly AND AllOWED tO COOl DOWN.
Cleaning
• Keep the ventilation vents of the air pump clean at all times, if
possible, prevent foreign matter from entering the vents.
• After each use, blow air through the air pump housing to ensure it is
free from all dust particles which may build up. Build up of dust particles
may cause the air pump to overheat and fail.
• If the enclosure of the air pump requires cleaning do not use solvents
but a moist soft cloth only. Never let any liquid get inside the product;
never immerse any part of the air pump into a liquid.
Note: Ozito Industries will not be responsible for any damage or
injuries caused by the repair of the air pump by an unauthorised person
or by mishandling of the product.
ImPORtANt:
StORE thE AIR PumP ONly IN A DRy lOCAtION
WhICh IS NOt ACCESSIBlE tO uNAuthORISED PERSONS.

TROUBLESHOOTING

Problem
Cause
The air pump
Cord not connected to
does not start
the power
On/off switch not in on
position
Adaptors disconnect
Loose adaptor
when the pump
switches on
Pump is operating
Some inflatable items
but the inflatable
have a check valve
item is not inflating/
that require pinching or
deflating
unscrewing
Pump is overheating
While inflating, the
deflation port is being
obstructed, restricting
the flow of the air pump
While deflating, the
inflation port is being
obstructed, restricting
the flow of the air pump
Solution
Connect the power
cord to a 240V
power outlet
Push the on/off
switch into the on
position
Ensure the adaptor
is pushed tightly
onto the air port
Pinch or unscrew
the items valve
while operating the
pump
Ensure the deflation
port is free of any
obstructions
Ensure the inflation
port is free of any
obstructions

DESCRIPTION OF SYMBOLS

A
Amps
Double insulated

CARING FOR THE ENVIRONMENT

Power tools that are no longer usable should not be disposed of
with household waste but in an environmentally friendly way. Please
recycle where facilities exist. Check with your local council authority
for recycling advice.
Recycling packaging reduces the need for landfill and raw materials.
Reuse of recycled material decreases pollution in the environment.
Please recycle packaging where facilities exist. Check with your
local council authority for recycling advice.

SPARE PARTS

Spare parts can be ordered from the Special Orders Desk
at your local Bunnings Warehouse.
For further information, or any parts not listed here, visit
www.ozito.com.au or contact Ozito Customer Service:
Australia 1800 069 486
New Zealand 0508 069 486
E-mail: enquires@ozito.com.au

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IDP-2000 and is the answer not in the manual?

Questions and answers

Summary of Contents for Ozito IDP-2000

  • Page 1 Power tools that are no longer usable should not be disposed of Note: Ozito Industries will not be responsible for any damage or with household waste but in an environmentally friendly way. Please injuries caused by the repair of the air pump by an unauthorised person recycle where facilities exist.
  • Page 2 When using an extension lead on a reel, always unwind the lead completely. Use of an extension lead Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New Zealand. not suitable for the power input of the tool or which is damaged or defective may result in a risk of fire and electric shock.
  • Page 3 Max. Run Time: 15min Weight: 0.55kg ozito.com.au IDP-2000 WARRANTY IN ORDER TO MAKE A CLAIM UNDER THIS The benefits provided under this warranty are in addition to other rights and remedies which are available to you at law. WARRANTY YOU MUST RETURN THE PRODUCT...
  • Page 4 KNOW YOUR PRODUCT SETUP & PREPARATION ElECtRIC AIR PumP 1. ADAPTORS 1 Inflation Port 4 Deflation Port 2 On/Off Switch 5 Power Cord 3 Air Pump Housing WARNING: ENSuRE thE tOOl IS SWItChED OFF AND DISCONNECtED FROm thE POWER SuPPly BEFORE PERFORmING ANy OF thE FOllOWING StEPS.
  • Page 5 OPERATION 2. SWITCHING ON & OFF 3. INFLATING ITEMS CAutION! thE POWER SuPPly FOR thIS PRODuCt ImPORtANt: BEFORE CONNECtING OR ShOulD BE PROtECtED By A RESIDuAl CuRRENt DISCONNECtING ACCESSORIES, AlWAyS mAKE SuRE DEvICE (RAtED At 30mA OR lESS). thAt thE AIR PumP IS tuRNED OFF. 1 Fit the required adaptor onto 1 To start operating the air the inflation port tightly.
  • Page 6 ENSuRE thE INFlAtION PORt IS NOt OBStRuCtED, OthERWISE thE uNIt COulD OvERhEAt. 3 Switch the air pump on at the on/off switch. 4 Once the item is deflated, switch the air pump off and then remove the adaptor from the valve. IDP-2000...

Table of Contents