Ozito PSDWK-1000 Instruction Manual

Ozito PSDWK-1000 Instruction Manual

Dirty water submersible pump kit

Advertisement

Quick Links

DIRTY WATER
SUBMERSIBLE
PUMP KIT
1000W
INSTRUCTION MANUAL

SPECIFICATIONS

Motor:
1000W
Max. Flow Rate:
18,000l/h
Max. Head
9m
Max. Immersion:
7m
Min. Suction Depth
50mm
Max Particle Size:
Ø20mm
Lay Flat Hose:
Ø25mm x 10m
Water Temp.:
1°C - 35°C
Weight:
9.4kg
ozito.com.au
IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO
Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.

WARRANTY

The benefits provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.
3 YEAR REPLACEMENT WARRANTY
Your product is guaranteed for a period of
original date of purchase and is intended for DIY (Do It Yourself)
use only. If a product is defective it will be replaced in accordance
with the terms of this warranty. Warranty excludes consumable
parts, for example: o-rings, bearing, seals, gaskets, universal
adaptors, L-shaped connector.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other
than that specified on the tool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the
instruction manual.
• If the tool is disassembled or tampered with in any way.
WHAT'S IN THE BOX
Submersible Pump
L-Shape Connector &
Universal Adaptor
Lay Flat Hose
Lowering Rope & Hose
Clamp
PSDWK-1000
36
months from the
1116

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PSDWK-1000 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Ozito PSDWK-1000

  • Page 1 Weight: 9.4kg ozito.com.au Lowering Rope & Hose Clamp PSDWK-1000 WARRANTY IN ORDER TO MAKE A CLAIM UNDER THIS The benefits provided under this warranty are in addition to other rights and remedies which are available to you at law. WARRANTY YOU MUST RETURN THE PRODUCT...
  • Page 2 KNOW YOUR PRODUCT SETUP & PREPARATION SUBMERSIBLE PUMP 1. UNIVERSAL ADAPTOR 1. Air Bleed Valve 5. Suction Base WARNING!: ENSURE THE PUMP IS 2. Float Switch Cable 6. Pump Housing DISCONNECTED FROM THE POWER 3. Outlet 7. Float Switch Adjustor SUPPLY BEFORE PERFORMING ANY OF THE 4.
  • Page 3 OPERATION 2. L-SHAPE CONNECTOR 3. FLOAT SWITCH The pump is fitted with a float switch, which controls how 1. Screw the L-shape connector into the pump the pump switches on and switches off. housing by rotating in a clockwise direction. Automatic mode When the pump is plugged into an outlet and left unattended it will turn on when the float switch turns on.
  • Page 4 YOUR PUMP HAS THE CAPACITY PUMPING WATER IN A HOME DOMESTIC TO PUMP DIRTY WATER WITH A NON SOLID APPLICATION. DO NOT USE IT FOR CORROSIVE, PARTICLE SIZE OF UP TO 20MM IN DIAMETER. ABRASIVE, EXPLOSIVE OR DANGEROUS LIQUIDS. PSDWK-1000...
  • Page 5 Pump will not turn off, even The float switch is stuck in the “on” position Ensure that the float switch is free to operate normally. Contact Ozito customer service if the though the water level is low problem still occurs...
  • Page 6 Replace the extension lead if damaged or defective. Then Note: The supply of 230V and 240V on Ozito pumps are interchangeable for Australia and New Zealand. This using an extension lead on a reel, always unwind the lead completely. Use of an extension lead not suitable for pump is earthed in accordance with AS/NZS 60335-2-41.

Table of Contents