Ozito PTP-065 Instruction Manual

Ozito PTP-065 Instruction Manual

High pressure petrol water pump

Advertisement

HIGH PRESSURE
PETROL
WATER PUMP
196CC 4 STROKE
INSTRUCTION MANUAL
SPECIFICATIONS
Motor:
4.85kW (6.5HP)
Engine:
4 Stroke, air cooled
Fuel Type:
Unleaded
Fuel Tank Capacity:
3.6L
Engine Capacity:
196cc
Max. Flow Rate:
17,000l/h
Max. Head:
55m
Max. Lift:
6m
Inlet/Outlet:
40mm (1
1
/
2
Spark Plug:
Champion L90C
Weight:
28kg
ozito.com.au
1
IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO
Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
")
WARRANTY
The benefits provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.
1 YEAR WARRANTY
Your product is guaranteed for a period of 12 months from the
original date of purchase and is intended for DIY (Do It Yourself)
use only. If a product is defective it will be repaired in accordance
with the terms of this warranty. Warranty excludes consumable
parts, for example: o-rings, bearing, seals, gaskets and adaptors.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other
than that specified on the tool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the
instruction manual.
• If the tool is disassembled or tampered with in any way.
WHAT'S IN THE BOX
Petrol Pump
Spark Plug Wrench &
Filter
Suction Hose
Fasteners & Adaptors
PTP-065
1215

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PTP-065 and is the answer not in the manual?

Questions and answers

Summary of Contents for Ozito PTP-065

  • Page 1 Champion L90C Weight: 28kg ozito.com.au Fasteners & Adaptors PTP-065 WARRANTY IN ORDER TO MAKE A CLAIM UNDER THIS The benefits provided under this warranty are in addition to other rights and remedies which are available to you at law. WARRANTY YOU MUST RETURN THE PRODUCT...
  • Page 2: Know Your Product

    KNOW YOUR PRODUCT SETUP & PREPARATION pETROL hIGh pREssURE WATER pUMp 1. CONNECTING THE INLET 1 Exhaust 5 Recoil Starter 9 Motor Housing 2 Air Filter 6 Priming Cap 10 Throttle Lever 3 Choke Lever 7 Fuel Cap 4 Fuel Lever 8 Fuel Tank WARNING! ENsURE ThE ENGINE Is shUT Off ANd...
  • Page 3: Connecting The Outlet

    2. CONNECTING THE OUTLET 3. INSTALLATION connecting the discharge Outlet cAUTION: ALWAYs cARRY OR LIfT ThE pUMp bY ThE The outlet allows for a 25.4mm (1”) and 40mm (1 ”) pipe to be fRAME TO AvOId dAMAGING ThE UNIT. connected and is capable of a maximum head of 55m. The pump has 3 outlets (2x 25.4mm and 1x 40mm), which allows for before starting, perform a few simple checks: multiple outlets to be used to pump water simultaneously, however this will result in lower pressure and flow rate.
  • Page 4: Operation

    OPERATION 4. PRIMING THE PUMP FOR OPERATION 5. FUEL & OIL Priming the pump prepares the motor for safe operation. Adding fuel WARNING! bE sURE TO sTOp ThE ENGINE ANd ThE cAUTION: dO NOT RUN ThE pUMp dRY, ThIs MAY ON/Off sWITch Is IN ThE Off pOsITION bEfORE REsULT IN dAMAGE TO ThE pUMp.
  • Page 5: Pre-Operation Inspection

    10-20 seconds. 2 Turn the on/off switch to the off position and move the fuel lever to the left (closed position). Note: Allow the engine to cool down before moving or storing the pump. PTP-065...
  • Page 6 OPERATION 8. ADJUSTING THROTTLE 9. MAINTENANCE storing the pump The throttle is used to regulate the rotational speed of the engine, which also controls the water flow out of the discharge outlet. Before storing the pump, it is recommended to empty the pump body of any water. 1 To increase the speed Turn the drain screw of the engine and water anti-clockwise and remove from flow, move the throttle the pump body to allow excess lever left towards the water to drain out.
  • Page 7: Maintenance Chart

    Reuse of recycled material decreases pollution in the environment. Please recycle packaging where facilities exist. Check with your local Note: Ozito will not be responsible for any damage or injuries caused council authority for recycling advice. by repair of the pump by an unauthorised person or by mishandling.
  • Page 8: General Power Tool Safety Warnings

    Cubic centimeters at your local bunnings Warehouse. Fire Toxic fumes for further information, or any parts not listed here, visit www.ozito.com.au or contact Ozito customer service: p/hr Per hour Pressure rating (kilopascals) Australia 1800 069 486 New Zealand 0508 069 486...

Table of Contents