universalblue JAVA 5060X User Manual page 54

ENGLISH
the dishwasher, do not use solvents or
abrasive cleaning products. Only use a
cloth with warm soapy water.
• To remove spots or stains from the
surface of the interior, use a cloth
dampened with water an a little
vinegar, or a cleaning product made
specifically for dishwashers.
When not in use for a long time
It is recommend that you run a wash cycle
with the dishwasher empty and then
remove the plug from the socket, turn off
the water supply and leave the door of the
appliance slightly open. This will help the
door seals to last longer and prevent odors
from forming within the appliance.
Moving the appliance
If the appliance must be moved, try to keep
it in the vertical position. If absolutely
necessary, it can be positioned on its back.
Seals
One of the factors that cause odours to form
in the dishwasher is food that remains
trapped in the seals. Periodic cleaning
with a damp sponge will prevent this from
ocurring.
PROBLEM SOLVING
Do not disassemble or repair the appliance
by yourself as it may result in anelectric
shock or personal injury.
To access to professional repair or order
spare parts, please get the support from
Universal Blue after-sales service. You can
find all details to contact us in after sales
service section included in this manual.
Spare parts will be delivered in a period
no longer than 15 days from order date,
if spare part requested is available in our
warehouse. To check availability for any
spare part, please contact Universal Blue.
Function-relevant genuine spare parts
according to the corresponding Ecodesign
order can be obtained from Customer
54
Service for a period of at least 10 years
from the date on which your appliance was
placed on the market within the European
Economic Area.
If you wish to know more details about
your product, please visit the following
website: www.ec.europa.eu
AFTER-SALES SERVICE
List of device error codes
page 16)
If an
disconnect the main water
supply
service. If there is water in the
base due to overfilling or a
small leak, the water must be removed
before restarting the appliance.
This device is designed to ensure maximum
reliability. However, in case of problem,
you will be able to determine its cause by
following the indications suggested in this
manual.
If the problem cannot be solved, please
contact the seller or the manufacturer.
All users should familiarize themselves
with this chapter. Knowing what can go
wrong can help you avoid further problems
(see table 19 and 20 on page 20).
ERP TABLE (EN60436)
See table 13 on page 24.
ENVIRONMENTAL INFORMATION
This appliance is labelled in
compliance with European
directive 2012/19/EU for Waste
Electrical
Equipment
ensuring that this appliance is
disposed of correctly, you will help prevent
any possible damage to the environment
and to human health, which might
otherwise be caused if it were disposed of
(s
ee table 7 on
overflow occurs,
before calling
and Electronic
(WEEE).
for
By