Advertisement
Available languages
Available languages
67.
Soup spoons
68.
Forks
69.
Knives
70.
Teaspoons
71. Dessert spoons
72.
Serving spoons
73.
Serving forks
74.
Gravy ladles
In order to avoid danger of
injury, place long and pointed
parts as well as knives in such
a way that they cannot cause
damage.
Do not let any item extend
through the bottom. Always
load sharp utensils with the
sharp point down!
Do not include the following utensils in
your dishwasher:
• Porcelain cutlery of wood, horn or
mother-of-pearl handles
• Plastic items that are not heat-resistant
• Old cutlery with glued parts that are not
temperature resistant
• Adhered cutlery or plates
• Copper articles
• Steel elements subject to oxidation
• Wooden trays
• Synthetic fibre elements
Some types of crystal can
become opaque after a large
number
pieces have a tendency to fade.
Glazed patterns can fade if
washed frequently.
Do not put items that are soiled
with cigarette ash, candle wax,
lacquer, or paint. If you buy
new dishes, please make sure
they are dishwasher safe.
Please do not overload your
dishwasher.
optimum results will not be
obtained and the device may
break down.
of
washes.
Silver
Otherwise,
Note: Very small items should not be
washed in the dishwasher as they could
easily fall out of the basket.
Removing the dishes.
To prevent water dripping from the
upper basket into the lower basket, we
recommend that you empty the lower
basket first, followed by the upper basket.
Items will be hot! To prevent damage,
do not take glass and cutlery out of the
dishwasher for around 15 minutes after the
program has ended.
PROGRAMS TABLE (See table 04 on page
14).
WITCHING THE DEVICE ON AND OFF
Turn on the dishwasher
• Open the dishwasher baskets and insert
the dishwasher. It is recommended to
load the lower basket first.
• Add detergent.
• Connect
the
observing the voltage instructions of
the device.
• Make
sure
connected to maximum pressure. Close
the dishwasher door and press the
"Power" button.
• Press Program button to select the
desired wash cycle.
Starting a program
• Draw out the lower and upper basket,
load the dishes and push them back. It
is commended to load the lower basket
first, then the upper one.
• Pour in the detergent.
• Insert the plug into the socket.Close the
door, press the Power button.
• Choose a program, the response light
will turn on.
Change the selected program
A cycle that is running can only be
changed if it has been running for short
time. Otherwise, the detergent may have
already been released and the appliance
may contain water. If this is the case,
the dishwasher needs to be reset and the
device
to
the
the
water
supply
EN
light,
is
51
Advertisement
