After-Sales Service - universalblue BALTICO 4060 User Manual

If you wish to know more details about your product, please visit the following website:
www.ec.europa.eu

13. AFTER-SALES SERVICE

LIST OF DEVICE ERROR CODES
When the device is not working properly, the display will show an error code to indicate
the problem.
ERROR CODE
E1
E2
E3
E4
E5
E6
E7
If an overflow occurs, disconnect the main water supply before calling for
service. If there is water in the base due to overfilling or a small leak, the water
must be removed before restarting the appliance.
This device is designed to ensure maximum reliability. However, in case of problem,
you will be able to determine its cause by following the indications suggested in this
manual.
If the problem cannot be solved, please contact the seller or the manufacturer.
All users should familiarize themselves with this chapter. Knowing what can go wrong
can help you avoid further problems.
PROBLEM POSSIBLE CAUSES
Blown fuse
Device does
The electrical current
not turn on
is not on
Low water pressure
Non fucnion
drainage
pump Overflow
RELATIONSHIP WITH MEANING
Door open
Water inlet
Water drainage
Temperature sensor
Overflow
Water leaks
Resistance
Replace fuse. Disconnect any other electrical apparatus that is
connected to the fuse.
Make sure the dishwasher is on and the door is closed. Make sure that
the plug is connected to the mains.
Make sure that the water inlet hose is correctly positioned and the
water faucet is open.
The device is designed to detect overflow problems
The dishwasher door is open during
operation of the appliance.
Problem with the water inlet of the
appliance
Problem in the drainage of the appliance
Malfunction in the temperature sensor
Overflow or loss of water from the
appliance
Water leaks from the appliance
The appliance heats up more than usual
HOW TO PROCEED
80