universalblue BALTICO 4060 User Manual page 60

may not switch off until the salt has dissolved completely.
• If there are salt spills, a pre-wash program can be run to remove them.
FILL THE DISPENSER WITH RINSE AID
The rinse aid is automatically added during the last rinse, ensuring a complete rinse,
free of stains and scratches on your dishes.
Attention!
Only use branded rinse aid for the dishwasher. Never fill the rinse aid dispenser
with any other cleaning agent (e.g. dishwasher detergent or liquid detergent). This
could damage the device.
When to refill the rinse aid dispenser:
• If there is no rinse aid warning light on the control panel, you can judge the
amount of rinse aid by the color of the optical level indicator "D" next to the
cover. If the dispenser is full, you will see a black dot. As the dispenser empties,
the black dot will disappear.
As the rinse aid decreases, the size of the dark spot decreases, as shown below.
•
Never allow the rinse aid to empty below 1/4.
To refill the rinse aid reservoir, follow these steps:
1. Open the dispenser by turning the lid to the left and remove it.
60