Total Runtime; Lap Time; Printer-Mode; Printer Runtime On - ALGE-Timing Timy LapTimer Manual

4.1

Total Runtime:

The displayboard shows the runtime, but no lap time.
4.2

Lap Time:

The displayboard shows the laptime, but no runtime.
5

PRINTER-MODE

It enables you to select beween both, a printout of laptimes and runtimes or one of
laptimes only.
To select these modes, please proceed as follows:
• Press the <MENU> button
• Select <LAPTIMER>
• Select <PRINT RUNTIME>
• Now you can choose between run time <ON> or <OFF>.
5.1

Printer Runtime ON

For each time stopped, the start time, finish time, run time and lap time (sequential
time) will be printed. The following example refers to one racer:
0001 ST 11:59:33.5736
FT 12:00:39.9269
1 RT
1 SQ
0001 ST 11:59:33.5736
FT 12:01:45.3325
2 RT
2 SQ
5.2

Printer Runtime OFF

For each time stopped, the start time, finish time and lap time (sequential time) will
be printed. The following example refers to one racer:
Timy LapTIMER
1:06.35
1:06.35
2:11.75
1:05.40
ID-number 1 start time (time of day)
ID-number 1 first lap time (time of day)
ID number 1 run time (first lap)
ID number 1 lap time (first lap)
ID-number 1 start time (time of day)
ID-number 1 second lap time (time of day)
ID number 1 run time (second lap)
ID number 1 lap time (second lap)
Page 5