Keyboard And How To Get Started; Program Laptimer; Operation Of Program Laptimer; Displayboard Mode - ALGE-Timing Timy LapTimer Manual

1

Keyboard and how to get started

See Timy manual „GENERAL".
2

Program LapTimer

The program LapTimer has been made for all sports that measure lap times (e.g.
motor racing). It is possible to have several competitors on the course. To measure
the times, you need to be able to input the racer number before he passes the finish
(lap).
3

Operation of Program LapTimer:

• Switch on the Timy as described in the Timy manual "GENERAL"
• Select <LapTimer>
• Clear the memory with key
• Input the time of day and date for synchronization and confirm by pressing ei-
ther one of the OK keys (
To start a synchronization, press the key START
• Now the ID-number 1 and the time zero are indicated on the display.
• To input another ID-number use the keyboard and confirm by pressing one of
the OK keys (
• Start the racer with a start impulse (channel 0) or by pressing the key
• Stop each competitor with a finish impulse (e.g. photocell).
• To restart a competitor, input the ID-number and press
you can start this ID-number again.
4

Displayboard Mode

You can select between two modes:
TOTAL-RUNTIME
LAP-TIME
To select these modes, please proceed as follows:
• Press the <MENU> button
• Select <LAPTIMER>
• Select <GAZ-MODE>
• Now you can choose between the modes <TOTAL-RUNTIME> and <LAP-
TIME>.
Page 4
Timy LapTimer
or
or ) or by pressing
or )
and press one of the OK keys (
.
.
or ).
.
and then . Now