Advertisement
i'JU,,liwJUL,,'J
lilL-,'J2_tlIJL:-_",,,jLILIL,_J
I_lli,,"j[I
'iTllLl"J<,,,-J
Check the following points if you are having trouble with your DECK.
No power...
Power turns itself off...
TV program cannot be recorded...
Timer recording
cannot be
performed...
There is no playback
picture,
or the
playback
picture is noisy or contains
streaks...
During special effects
playback
picture may contain
some vertical
jitter when using a TV with an
Automatic
Vertica} Hold Control...
DECK contact be controlled...
DECK cannot be remote controlled...
PROG buttons do not respond...
Completely
insert Power Plug into an AC outlet.
Press POWER button on.
Make sure power source is active.
• Auto power-off
(shutoff) occurs
after about 5 rain.
in DVD mode with no operation, or if there is no
broadcast
signal in TV or Playback
mode.
Turn the power back on. (pp. 23, 33)
• Check connections
between
DECK, external
antenna, and TV.
• Check channel
selections.
• Make sure your antenna system (CABLE
or TV) is
correctly
set. (Channels
[p. 1P,])
• Make sure cassette
record tab is intact. (p. 6)
• Confirm that clock is set to current time and date.
• Make sure Cable/DSS
box (if used) is left on and
tuned to channel to be recorded.
• Set recording
start/stop
times correctly.
(p. 24)
• Timer recording
may not be performed
or continued
if a power interruption
occurs before or during a
Timer Recording,
even after power is restored.
• Select channel 3 or 4 on TV to match VCR output
channel
(3 or 4) (p. 16) or select LINE.
• Set VCR/TV selector
to "VCR."
• Adjust TRACKING
control in either direction.
(p. 4)
• Try Head Cleaning.
(p. 4)
• Set TV's Vertical Hold Control to MANUAL,
then
adjust.
• Make sure DECK power is on.
• Check Remote
batteries.
• Make sure VCR LOCK is set to off. (p. 32)
•
Make sure Remote is in proper mode. (p. 28)
• Make sure Timer Recording
is not in progress.
• Make sure DECK power is on.
• Make sure Remote is in VCR mode.
• Aim Remote Control directly at remote sensor on DECK. (p.9)
• Avoid any object blocking signal path.
• Check Remote batteries.
(p. 4)
• Exposing
DECK remote sensor to direct fluorescent
or outdoor light may cause signal interference.
• PROG functions
are not available
in COMPONENT
Video Output and S-VIDEO OUT. Set TV to either RF
IN or VIDEO IN. (p. 10)
• Check
Remote
batteries.
(p. 4)
• Press VCR or DVD button for DVD/VCR
mode. (p. 28)
Advertisement
