Advertisement
• Connecting
Amplifier
(5.1 ch Surround
system)
[Digital
connection]
DECK,S' Dolby
Digital
Decoder,_Amplifier.i,
Speaker
or
DECK.),
DTS (Digital Theater Systems)
Decoder
=l,Amplifier=l,
Speaker
When DUDs recorded in Dolby Digital or DTS are played, Dolby Digital bitstream
or DTS bitstream is output from the DECK OPTICAL digital audio output connector.
When DECK is connected to a Dolby Digital decoder or DTS decoder, you can
enjoy theater-quality
audio in your home. [An optical digital audio cable (optional)
is required when an optional Dolby Digital decoder or DTS decoder is used.]
Notes
on connecting
an optical
digital
audio
cable
(optional)
• Firmly connect the cable to the
connector.
/
D VD/VCR
DECK
(Rear)
Front
Speaker
(A)pticalDi_ital
udio(kd_]e
(optional)
To Optical
Digital Audio
Input Connector
S, bwoqfZ_r
Caution
for optical
digital
audio
output
connector:
• When connecting
an amplifier
(with an Optical
Digital Input Connector)
which does
not
contain the Dolby Digital or DTS decoder, be sure to select "PCM"
at "Dolby
Digital"
and "PCM"
at "dts"
of the Settings
for DVD Operation
"Audio
Output" (see p. 53).
Otherwise,
any attempt
to play DVDs may cause such a high level of noise that it may
be harmful to your ears and damage
your speakers.
• When a Dolby Digital/DTS
decoder
is connected,
please select "Bitstream"
at "dts"
or
"Dolby
Digital" of the Settings
for DVD Operation
"Audio
Output".
If "PCM"
is selected,
there will be stereo sound. (See p. 53.)
• CDs can be played as usual.
Note:
• Some DTS decoders which do not support
DVD-DTS
interface may not work properly
with
DECK.
15
Advertisement
