Download Print this page

Panasonic OmniVision PV-D4734S Operating Instructions Manual page 35

Advertisement

Connection
VCR/ Omrcorder
(Hi-Fi)
D VD/VCR
DECK
73/
Front
of DECK
VIDE01N2L-AUDI0IN2-R
O
O
O
(Audio/Video
In Terminals
on the front of DECK are
available)
O
Connect VIDEO OUT terminal on Playing VCR to VIDEO IN terminal on DECK.
To monitor the dubbing, also connect TV as shown.
(_)
Connect "L" and "R" AUDIO OUT terminals on Playing VCR to "L" and "R"
AUDIO IN terminals on DECK.
In place of Playing VCR, you can use other equipment,
such as a Camcorder.
Simply connect the unit's Audio/Video
outputs to DECK.
i:{:[.].]l,
h,[,|/:_
Hi_!
I] :(_ [_
Insert a pre-recerded
tape,
Insert a blank
tape with record
tab.
1
2
Press INPUT to set DECK Input mode to
LINE for Video Input.
(See "Selecting the Input Mode" below.)
Press PLAY, then PAUSE
immediately to enter PLAY/PAUSE
mode.
The operation of steps 4 and 5
playing and recording VCRs at
Press PLAY to start dubbing.
Playing VCR starts playback.
Press REC, then STILL/PAUSE
immediately
to enter REC/PAUSE
mode.
must be done on the
the same time.
Press STILL!PAUSE
to start dubbing.
DECK starts recording.
Press STOP to stop dubbing.
Press STOP to stop dubbing.
To Monitor
Dubbing
on TV
1 Turn TV on and tune to the Recording
VCR channel
(CH 3 or CH 4).
2 If Auto VCR/TV (see p. 32) is set to
"OFF," press VCR/TV on the remote
for VCR mode.
O.
Dubbing tapes protected
with Copy
Guard will result in poor quality
recordings.
Selecting
the Input
Mode
Method
1: Press INPUT repeatedly.
Channel Number_" LINE1 _" LINE2
Method
2: Press CH A/y.
Display
will change
as below.
:4
Press•
(CABLE) (TV)
Press•
• '%1"or k2" lights up on Multi Function Display
(about 4 seconds) when LINE] or LINE2 is selected.
•LINE]:
For rear audio/video connection,
LINE2: For front audio/video connection.
Caution:
.Unauthorized
exchanging
and/or copying
of copyrighted
recordings
may be
copyright
infringement.
• Please note that some tapes cannot
be dubbed on DECK.
Also, it is not possible
to dub DVD/CD
to VHS tapes using DECK.
• When _
appears on the screen while a button is being operated,
it means
that the corresponding
operation
is prohibited
by DECK or the disc.
35

Advertisement

loading