Advertisement
I-J.-[e][_ .-t =[,,-$.-,] kVA = [elIJi d
Sets the Component Video Output Connector (p. 10, 13)
to output the Progressive scan signal.
Press ACTION
to display DVD MAIN MENU.
2
Press AV
to select "PROGRESSIVE
OUT," and
press SET repeatedly
for mode. (See below.)
OFF:
Progressive
scan signal is not output.
ON:
Progressive
scan signal is output from the
Component
Video Output Connector.
Press ACTION
to exit this mode.
• If the television is not progressive compatible,
a progressive scan picture is not availaMe.
Connect the Video Output or S-Video Output
connector (see p. 12, 13) and set PROGRESSIVE
OUT to "OFF".
• CONSUMERS
SHOULD NOTE THAT NOT ALL
HIGH DEFINITION TELEVISION SETS ARE FULLY
COMPATIBLE
WITH THIS PRODUCT AND MAY
CAUSE ARTIFACTS TO BE DISPLAYED IN THE
PICTURE. IN CASE OF 525 PROGRESSIVE
SCAN
PICTURE PROBLEMS, IT IS RECOMMENDED
TO SET PROGRESSIVE OUT TO "OFF".
IF THERE ARE QUESTIONS REGARDING OUR TV
SET COMPATIBILITY
WITH THIS MODEL 525p
DVDNCR
DECK, PLEASE CONTACT OUR
CUSTOMER SERVICE CENTER.
r_O
G®®@F
ACTON
O_An r_:_W
7®® ....
AC_ON
SELECT
AV
SET
55
Advertisement
