Advertisement
Turn TVon,
See connections (_) RF Coaxial Cable Connection and (_ AV Cable Connection on page 12.
<RF Coaxial Cable Connection>
Set TV to channel 3.
<AV Cable Connection>
Set TV to VIDEO.
[DECK -,.- TV]
• Go to "Initial Setup (Ready to Play)." (See below.)
[Cable Box -,.- DECK -,.-TV], [DSS -,.- DECK -,.-TV]
• Turn on Cable Box and set it to your Public Broadcasting Station (PBS) channel
in your time zone.
• If you use a DSS Receiver, it must be turned off.
1
2
Press VCR on remote for VCR mode.
Plug DECK Power Cord into AC wall outlet. DECK comes on and auto channel
and clock set starts.
• If screen below does not appear, check DECK - TV connection and, if TV is tuned to
channel 3, try switching it to channel 4.
• To change VCR's output channel, please see "VCR's Output Channel" on page 19.
Plug VCR Power plug into an AC wall outlet.
AUTO
CLOCK
SET
PROCEEDING
CANCEL:STOP
O
• Function buttons are void during Initial Setup.
• To eject a tape during Auto Set, press EJECT on remote
or STOP/EJECT twice on DECK.
Then make settings manually. (See p. 18.)
• If Auto Clock Set takes more than 30 minutes,
press STOP and perform settings manually. (See p. 18.)
Continued on next page...
16
Advertisement
