Table of Contents
Advertisement
19.1 Emergency release
unlock door
Required: The drain pump is empty.
→ Page 42
Running water can
1. ATTENTION!
lead to material damage.
Do not open the door if there is water
▶
can be seen behind the glass.
Pull down and release the
emergency release with the aid of
a tool.
a The door lock is unlocked.
Place the service cover and click it
2.
into place.
Close the service door.
3.
2
0 Transport, on-
hit and drain
huh
Here you will learn how to prepare
the device for transport and storage.
We also explain how to dispose of
old devices.
20.1 Disassemble device
Remark: Detailed instructions for use
can be found at www.bosch-
home.com or by scanning the QR
code on the title page of these
operating instructions.
Transport, storage and disposal NL
Close the tap.
1.
Empty the water inlet hose.
2.
Turn off the device.
3.
Unplug the appliance from the
4.
mains.
Let the suds drain.
5.
→
"Clean the drain pump",
Page 42
Disassemble the hoses.
6.
Empty the dosing containers.
7.
20.2 Installing transport locks
Secure the device before
transport with the transport locks
to avoid damage.
Remove the 4 cover caps using a
1.
screwdriver.
Keep the cover caps.
Install the 4 transport locks. When
2.
doing so, observe the description
Removing transport locks and
proceed in reverse order.
20.3 Recommissioning the
device
For more information, see
▶
→ "Set up and connect",
Page 13 and
→ "For the first use",
Page 20.
57
Advertisement
Table of Contents
