NL Troubleshooting
Malfunction
"E:36 / -10"
"E:36 / -25 / -26"
"E:10 / -00 / -10 /
- 20"
"E:35 / -10"
46
Cause and Troubleshooting
Unauthorized extension mounted on the water drain
hose.
Remove unauthorized extensions to the wa-
▶
discharge hose. Connect device
Pump cover is not fully screwed in.
Make sure that the pump cover is up to the stop
▶
screwed into the device. The pump cover handle
must be vertical.
→
"Cleaning the drain pump", Page 44
Drain pump is clogged.
→ " Cleaning the drain pump", page 42
▶
Pump of the intelligent dosing system is blocked.
Switch off the device.
1.
Clean the pump unit.
2.
→ "Cleaning the detergent drawer",
Page 41
If the indication reappears, enable the service.
3.
→ "Service", page 58
Remark: You can start the washing program if you
deactivate the intelligent dosing system and dose
manually.
→ "Keys", Page 24
Water pressure is low.
No solution possible.
Strainer in the water supply is clogged.
Clean the strainer in the water supply.
▶
Water tap is closed.
Open the water tap.
▶
Water supply hose is kinked or pinched.
Make sure that the water inlet hose is not
▶
nods or clenches.
Water in the bottom tray.
Close the tap.
▶
Please contact customer service.
▶
→ "Service", page 58
Device is leaking.
Close the tap.
▶
Please contact customer service.
▶
→ "Service", page 58