Table of Contents
Advertisement
NL Intelligent dosing system
Place liquid detergent and fabric
3.
softener in the appropriate dosing
containers.
→
"Detergent drawer", Page 19
When filling, do not exceed the
maximum fill level mark.
Close the filler cover.
4.
Remark: Close the filler covers
immediately after filling to ensure
that the liquid detergent or fabric
softener does not dry out.
If necessary, add detergents such as
5.
stain remover, softener or bleach
to the manual dosing dispenser.
→ "Detergent and laundry care
dosing agent", page 33
Slide the detergent drawer into the
6.
appliance.
The basic dosing amount
7.
→ Page 36 To adjust.
15.3 Content of the dosing
container
Remarks
s When you view the contents of the
If the dosing container changes, the
basic dosing for this dosing
container is reset.
36
s When you use both dosing containers
for liquid detergents, select a
dosing container to be used during
washing.
Adjusting the contents of the dosing
container
Press . for approx. 3 s
1.
Press i-DOS to set
2.
len.
a appears in the display
ven.
Press again to set.
3.
To finish the setting, wait briefly.
4.
15.4 Basic dosing amount
The basic dosing amount is based on
the information from the detergent
manufacturer, the water hardness
and the degree of soiling of the
laundry.
Always set a basic dosing amount,
which is geared to a standard load of
4.5 kg. Detergent dosage
Basic dosing amount
To adjust
Press . for approx. 3 s
1.
a The display shows the set ba-
hissing quantity for .
Press / to change the setting
2.
to adjust.
To finish the setting, wait briefly.
3.
Remark: To adjust the basic dosing
amount for , repeat the steps with
i-DOS.
i-DOS to
i-DOS.
i-DOS.
Advertisement
Table of Contents
