Advertisement
Functions of function keys and parameter setting knobs
Set a desired channel from the four channels using any of F1 to F4
keys, then set the limiter/compressor of the output channel selected using the parameter
knob.
CH-A (F1)
: Sets output channel A.
CH-B (F2)
: Sets output channel B.
CH-C (F3)
: Sets output channel C.
CH-D (F4)
: Sets output channel D.
ATTACK (P1)
: Sets the attack time (0.5, 1, 2.510, 20, 50, 100, 200 (msec)).
THRESHOLD (P2) _ : Sets the threshold level (+24, dB to — 6 dB, at 2 dB steps).
RATIO (P3)
: Sets the compression ratio (2: 1,4: 1, 10:1, ore:
1).
RELEASE (P4)
: Sets the release time (100 msec to 1 sec, at 100 msec steps).
ON/OFF (F6/F7)
The ON/OFF (F6/F7) keys are used to set the limiter/compressor function ON/OFF.
ON/OFF are set for each of eight output channels.
When ON (F6) is pressed, the limiter/compressor function operates.
When OFF (F7) is pressed, the signal will pass through the processing block without the
limiter/compressor function operating.
Even when set to OFF, parameter settings will be preserved, and settings can be performed
while viewing parameter values.
EXIT (F10)
Press the EXIT (F10) key to return to the main menu from the limiter/compressor setting
menu.
33
Advertisement
