Advertisement
5. Insert the device tray with LED cable to 3.5-inch expansion bay(2). Then connect LED cable to the CN102
connector of the control kit.
6.
Install for N8181-152 Internal simple UPS with the following procedures.
6-1.
Mount N8181-152 internal simple UPS to the battery holder bracket as the direction figured
below. And fix the battery with spring.
6-2.
Insert the battery holder bracket that the internal simple UPS is mounted to the device tray,
then fix it with a countersunk screw.
Device tray with LED cable
Internal simple UPS
Battery Holder Bracket
Spring
Countersunk screw
18
CN102 Connector
LED Cable
Advertisement
