Advertisement
3-3.
Remove two power cables from the power connector on the motherboard.
Rear Side
Front Side
3-4.
Connect the I2C cable of the control kit to the I2C connector on the motherboard.
3-5.
Connect two power cables that removed in step 3-3 to connector on the control kit.(Indicated by
circle on the figure)
Motherboard
I2C Cable
Please refer step 7-4 for detailed I2C
connector location on the motherboard.
I2C Connector
Control kit
P2 Connector
P1 Connector
16
Please refer step 7-4 for detailed power
connector location on the motherboard.
Advertisement
