Logging Off Portal Users; Displaying And Maintaining Portal - H3C S5500-EI Series Security Configuration Manual

Step
1. Enter system view.
2. Configure the portal user
information synchronization
function.
The user information synchronization function requires that a portal server supports the portal user
heartbeat function. Only the IMC portal server supports the portal user heartbeat function. To implement
the portal user synchronization function, you also need to configure the user heartbeat function on the
portal server and make sure the product of interval and retry is greater than or equal to the portal user
heartbeat interval. H3C recommends that you configure the interval to be greater than the portal user
heartbeat interval configured on the portal server.
For redundant user information on the device (information for users who are considered nonexistent on
the portal server), the device deletes the information during the (N+1)th interval, where N is equal to the
value of retries configured in the portal server user-sync command.

Logging off portal users

Logging off a user terminates the authentication process for the user or removes the user from the
authenticated users list.
To log off users:
Step
1. Enter system view.
2. Log off users.

Displaying and maintaining portal

Task
Display the ACLs on an interface
(available only on the S5500-EI
series).
Display portal connection statistics
on a specific interface or all
interfaces (available only on the
S5500-EI series).
Command
system-view
portal server server-name user-sync
[ interval interval ] [ retry retries ]
Command
system-view
portal delete-user { ipv4-address |
all | interface interface-type
interface-number | ipv6
ipv6-address }
Command
display portal acl { all | dynamic |
static } interface interface-type
interface-number [ | { begin |
exclude | include }
regular-expression ]
display portal connection statistics
{ all | interface interface-type
interface-number } [ | { begin |
exclude | include }
regular-expression ]
163
Remarks
N/A
Not configured by default.
The portal server specified in the
command must exist. This function
can take effect only when the
specified portal server is
referenced on the interface
connecting the users.
Remarks
N/A
Required.
The ipv6 ipv6-address option is
available on only the S5500-EI
series.
Remarks
Available in any view
Available in any view