H3C S5500-EI Series Security Configuration Manual page 185

Figure 61 Portal server configuration
# Configure the IP address group.
Select User Access Manager > Portal Service Management > IP Group from the navigation tree to enter
the portal IP address group configuration page. Then, click Add to enter the page shown in
Enter the IP group name.
•
• Enter the start IP address and end IP address of the IP group. Make sure that the host IP address is
in the IP group.
Select a service group. By default, the group Ungrouped is used.
•
Select the IP group type Normal.
•
Figure 62 Adding an IP address group
# Add a portal device.
166
Figure 62.