H3C S5500-EI Series Security Configuration Manual page 419

Hide thumbs Also See for S5500-EI Series:

Table of Contents

[SwitchB] interface gigabitethernet 1/0/1

[SwitchB-GigabitEthernet1/0/1] arp filter binding 10.1.1.2 000f-e349-1233

[SwitchB-GigabitEthernet1/0/1] quit

[SwitchB] interface gigabitethernet 1/0/2

[SwitchB-GigabitEthernet1/0/2] arp filter binding 10.1.1.3 000f-e349-1234

After the configuration is complete, GigabitEthernet 1/0/1 will permit incoming ARP packets with

sender IP and MAC addresses as 10.1.1.2 and 000f-e349- 1 233, and discard other ARP packets.

GigabitEthernet 1/0/2 will permit incoming ARP packets with sender IP and MAC addresses as 10.1.1.9

and 000f-e349- 1 233 and discard other ARP packets. ARP packets from Host A are permitted, but those

from Host B are discarded.

Troubleshooting

S5500-si series