H3C S5500-EI Series Security Configuration Manual page 79

Create an account for portal users:
4.
Click the User tab, and select All Access Users from the navigation tree.
a.
Click Add.
b.
Configure the following parameters:
c.
Select the user hello, or add the user if it does not exist.
Enter portal as the account name and set the password.
Select the access service Portal-auth/acct.
Configure other parameters as needed.
Click OK.
d.
Figure 20 Creating an account for portal users
Configuring the portal server
Configuring the portal server:
1.
Click the Service tab, and select User Access Manager > Portal Service Management > Server
a.
from the navigation tree.
Enter the URL address of the portal authentication main page in the format
b.
http://ip:port/portal, where ip and port are those configured during UAM installation.
Usually, the default port 8080 is used. Leave the default settings for other parameters.
Click OK.
c.
60