Table of Contents
Advertisement
Port
POWER
1
2
ON/OFF
Gigabit
3
WAN
4
LAN1~4
5
USB
6
DSL
7
WPS
8
WLAN
9
Reset
WiFi
8
Antennas
Connect the supplied Power Adapter to this port.
Power ON/OFF switch
Connect to Fibre/ Cable/ xDSL Modem with a RJ-45 cable, for
broadband connectivity
* Note: this port is a LAN/WAN configurable port.
Connect a STP Ethernet cable to one of the four LAN ports when
connecting to a PC or an office/home network of 10Mbps /100Mbps
/1000Mbps
Connect the USB device (Printer, USB 2.0 storage, 3G/LTE 3G USB
modem) to this port.
Connect to the xDSL/ telephone network with RJ-11 cable(telephone)
Press & hold the button for 2 seconds to trigger WPS function
* For WPS configuration, please refer to the WPS section in the
User Manual.
Press & hold the button for more than 6 seconds to enable/disable
wireless
Push and hold the reset button for 5 seconds to restore to its factory
default settings (this is used when you cannot login to the router, e.g.
forgot your password).
3 Fixed antennas for 5G.
Screw the supplied 3G/4G LTE antennas onto the antenna connectors
on both sides
12
Meaning
Advertisement
Table of Contents
