Sony DCR-TRV8 Operating Instructions Manual page 55

Dubbing a tape
Using the i.LINK cable (DV connecting cable)
Simply connect the VMC-IL4435/2DV/4D.V i.[JNK cable (DV connecting cable) (not
supplied) to [ DV IN/OUT and to DV [N/OUT of the DV products. With digital-to-
digital connecl_on, video and audio signals are transmitted in digital form for high-
quality editing. You cannot dub the litles, display indicators or the contents of cassette
meIllory.
(1) Insert a blank tape (or a tape you want to record over) into the VCR, and insert
the recorded tape into your camcorder.-_-
(2) Set the POWER switch to VTR.
(3) Play back the recorded tape on your camcorder.
(4) Start recording on the VCR.
: Signal flow
_,DV [N/OUT
(not supplied)
DV IN/OUT
.mill
When you have finished dubbing a tape
Press • (STOP) on both your camcorder and the VCtL
You can connect one VCR only using the i.UNK cable (DV connecting cable).
During digital editting
You cannot use DIGITAL EFFECT button functions.
You can also use your camcorder as a recorder
You can use your camcorder as a player or recorder without changing the connection.
When you use your camcorder as a recorder, the DV IN indicator appears in the
viewflnder or on the LCD screen. The DV IN indicator may appear on both equipment.
If you record playback pause picture with the _ DV IN/OUT jack
The recorded picture becomes rough. And when you play back the picture using the
other video equipment, the picture may jitter.
To perform a more precise editing (DCR-TRVIO only)
Use DV synchro-editing function (p. 56).
55