Cleaning Nozzles; Clean Ring Area In Nozzle Tray - Coca-Cola freestyle 8100 User Manual

COCA-COLA FREESTYLE 8100 | MAINTENANCE
®

Cleaning nozzles

Using a clean cloth, twist both
1
nozzles counter clockwise
and pull down to remove .
Scrub both nozzles with blunt end
2
of nozzle brush and soap .
Rinse with warm water .
Allow to air dry .
Submerge all parts
3
in sanitizer for 2 minutes .
Agitate to remove air pockets .
22
Remove
inner diffuser
from water
nozzle .
Use wire handled
brush to scrub holes
in plastic cap .
2
© 2023 The Coca-Cola Company | Confidential information of The Coca-Cola Company | Coca-Cola Freestyle® 8100 User Guide | V2 231110
COCA-COLA FREESTYLE 8100 | MAINTENANCE
®

Clean ring area in nozzle tray

Scrub both ring areas
1
including holes with
pointed end of nozzle
brush dipped in sanitizer .
Wipe rings with clean cloth and
2
sanitizer until it comes away clean .
Wait 2 minutes .
Repeat scrubbing and wiping rings
with clean sanitizer .
Re-insert nozzles
4
by pushing upward
and rotating clockwise .
Pour remaining
sanitizer down
dispenser drain .
Allow to air dry .
© 2023 The Coca-Cola Company | Confidential information of The Coca-Cola Company | Coca-Cola Freestyle® 8100 User Guide | V2 231110
Scrub inner injector
rings with wire
handled brush
dipped in sanitizer .
Insert cleaned
3
inner diffuser into
water nozzle .
23