Maintenance & Care; Transport, Handling/Extended Storage - GD Rapter RR BC 20-42.7 Original Owner's Manual

TRANSPORT, HANDLING
• Blade guard should be installed when
transport, handing of the unit.
INSTALLING BLADE GUARD
Clefte the blade guard and install on the
blade ,then put the pin into the guard
notch.
• The engine should be turned off when
the unit is moved between work areas.
CHOKE
SAWING SAPLINGS FILTER COVER KNOB
• After the engine has stopped ,the
muffler is still hot. never touch hot Parts
such as the muffler.
• Confirm that the fuel is not leaked from
tank.
EXTENDED STORAGE
• Inspect, clean and repair unit if
necessary.
• Remove all fuel from tank.
• Start engine-This will consume all fuel in
fuel line and carburetor.
• Remove spark plug and pour one tea
BINDING
spoon of clean motor oil into spark plug
hole of cylinder-replace spark plug.
• Store in clean, dry, dust free area.
• Clean or replace the plug if fouled with
heavy oily deposits.
• Replace the plug if the center electrode
DO NOT
is worn rounded at the end.
HACK LARGE
• Spark gap 0.6-0.7mm (.023".028")
TREES
• Fastening torque =145-155kg.cm(125-
135in.lb)
0.6-0.7mm(0.023"-0.028"in.)
23