Instrument Options; Packaging For Shipment - Tektronix 11A32 User's Reference Manual

General Information
Instrument Options
Option 22 includes two P6134 probes.
Packaging for Shipment
If this instrument is to be shipped by commercial transportation, we recommend
that it be packaged in the original manner. The original carton and packaging
material should be saved and reused for this purpose.
NOTE
Package and ship plug-in units and mainframes separately.
If the 11A32 is to be shipped to a Tektronix Service Center for service or repair,
attach a tag to the instrument. On the tag, include the following information:
• Name and address of the instrument owner;
• Name of a person at your firm who can be contacted about the instrument;
• Complete instrument type and serial number; and
• A description of the service required.
If the original package is not available or is not fit for use, package the 11A32 as
follows:
1. Obtain a corrugated cardboard carton with inside dimensions at least six
inches greater than the instrument dimensions. Use a carton with a test
strength of at least 200 pounds.
2. Fully wrap the 11A32 with anti-static sheeting, or its equivalent, to protect
the finish.
3. Cushion the 11A32 on all sides by tightly packing dunnage or urethane
foam between the carton and the instrument. Allow three inches of packing
on each side.
4. Seal the carton with shipping tape or with industrial staples.
5. Mark the address of the Tektronix Service Center and your return address
on the carton in one or more prominent places.
11A32 User Reference Supplement
1-5