Audio; Channels - Sony GRAND WEGA KDF-E42A10 Operating Instructions Manual

Other Information
Audio
Good picture, no sound [_
Press MUTING so that Muting disappears
t}om the screen (see page 44).
[_ Make sure the
Speaker
option is set to On ill the Audio setting (see page 67).
[_ Make sure the MTS option is set to Stereo or Mono (see page 67).
I_ When the HDMI IN input is in use, surround sound, such as AC-3 and DTS,
cannot be input. Change the sound setting for the external input device to Linear
PCM.
Audio noise [_ Communication problems may occur if infrared conmmnication equipment (e.g.,
infrared cordless headphones) is used near the TV. Use headphones other than
infrared cordless headphones. Also, if you use infrared communication equipment
other than infrared cordless headphones, move the infrared transceiver away from
the TV until the noise is eliminated, or move the transmitter and receiver of the
infrared communication equipment closer together.
Cannot gain enough volume [_ Increase the volume of the cable box using the cable box's remote control. Then
when using a cable box press TV(FUNCTION) once (the TV indicator lights up) and adjust the TV's
volume.
Sound seems weak or [_ The TV's audio nfight be set to Auto SAP or
Mono,
when it might be better set to
insufficient Stereo. In the Audio setting (see page 67), set the MTS setting to Stereo. If
already set to
Stereo,
switch to Mono (which may reduce background noise
during weak stereo broadcasts).
Cannot raise the volume on [_ If the Speaker option is set to Off and the Audio Out option is set to Fixed (in
external speakers order to output the sound to your audio system), use your audio receiver to adjust
the sound (see page 67). Or, to use the TV remote control, set the Audio Out
option to Variable.
[21 To turn on the TV speakers, set the
Speaker
option to On (see page 67).
Channels
Cannot receive upper channels [_ Press ANT to select the VHF/UHF input (see page 44).
(UHF) when using an antenna [_ Use Auto
Program
in the Channel setting to add receivable channels that are not
presently in the TV's memory (see page 72).
Cannot receive any channels [_ Use Auto
Program
in the Channel setting to add receivable channels that are not
when using cable TV presently in the TV's memory (see page 72).
[21 Press ANT to select the CABLE input (see page 44).
Cannot receive or select I_ Use Auto
Program
in the Channel setting to add receivable channels that are not
channels presently in TV memory (see page 72).
Some digital cable channels are [_ Certain cable companies have limitations on the broadcast of digital cable
not being displayed channels. Check with your cable company for more information.
[_ The digital cable channel may be set to Hidden in the Channel setting (see page
72).
92