Sony GRAND WEGA KDF-E42A10 Operating Instructions Manual page 70

Using the Settings
"_° If 4:3 Default is set to
anything but Off, the
Wide Mode setting
changes only for the
current channel. When
you change channels
(or inputs), Wide Mode
is automatically
replaced with the 4:3
Default setting. To retain
the current Wide Mode
setting as channels and
inputs are changed, set
4:3 Default to Off.
4:3 Default Wide Zoom
Select to enlarge the 4:3 picture, to fill the 16:9
Select the d@mlt screen, keeping the original image as much as
s'creen mode to possible.
use for 4:3 Normal Select to return the 4:3 picture to normal
s'ources, mode.
Full Select to enlarge the 4:3 picture horizontally
only, to fill the display area.
Zoom Select to enlarge the picture horizontally and
vertically to an equal aspect ratio that fills the
wide screen.
Off Select to continue using the current screen
mode setting when the channel or input is
changed.
Display Area Select Normal to return to the default display area. Select -1 or
-2 to keep the edge of the picture out of screen.
Vertical Center
Allows you to move the position of the picture up and down in
the window. (Available only in Zoom mode.)
Press tl. or II, and press @ to choose a correction between +5
and -5.
Vertical Size Allows you to adjust the vertical size of the picture. (Available
only in Zoom mode.)
Press tl. or ,I, and press @ to choose a correction between +5
and -5.
7O