Accessing The Audio Settings; Selecting Audio Options - Sony GRAND WEGA KDF-E42A10 Operating Instructions Manual

Using the Settings
Accessing the Audio Settings
1. Press WEGA GATE ........
2. Select Settings ............... _
3. Highlight ........................
4.Press to select ................
To highlight an option and to change settings, press tl. !1,I. *.
Press @ to confirm the selection.
To exit the Audio, press _._.
Selectmg Audio
OpHons
"_° Sound Mode settings
are independent of
settings in the
Treble/Bass options.
"_° TruSurround XT
attempts to create the
same surround effect
produced by a
multichannel system
using the left and right
speakers.
Tile Audio settings include tile following options:
Sound
Dynamic
Select to enhance treble and bass.
Mode Standard
Suitable for spoken dialog.
Custom Flat setting.
Reset
Reset the following options to the defimlt setting:
Treble, Bass,
Balance, Steady Sound, Volume Offset, Effect and BBE.
Treble Adjust to increase or decrease higher-pitched sounds.
Bass Adjust to increase or decrease lower-pitched sounds.
Balance Adjust to emphasize left or right speaker balance.
Steady
On Select to stabilize the volume across all programs
Sound and commercials.
Off Select to turn off
Steady Sound.
Volume
Adjust to increase or decrease tile sound level of tile current input
Offset (TV or video input) relative to other inpnts.
Effect TruSurround
Select for surround sound (for stereo programs
XT only).
Simulated Acids a surround-like effect to lnono programs.
Off Normal stereo or mono reception.
BBE Select to give sound more impact by compensating for phase effects
in speakers. Select from High, Low, and Off.
66