Cable Box - Sony GRAND WEGA KDF-E42A10 Operating Instructions Manual

ConnecUng_e TV
Cable Box
For best results, use this connection if:
[] Your cable colnpany scralnbles all channels, which requires you to use a
cable box.
[] You do not have a VCR. (If you have a VCR, see pages 34 and 35.)
With this connection you can:
[] Use the TV's remote control to change channels coming through the
cable box to the TV's VHF/UHF input jack. (You must first program the
remote control for your specific cable box.)
To connect the cable box
t Connect tile CATV cable to tile cable box's input jack.
a,) Use a coaxial cable to connect the cable box's output jack to the TV's
VHF/UHF input jack.
3 Run Auto Program, as described in "Setting Up the Channel List" on
pages 32.
CATV cable
Coaxial cable
VHF/UHF
RearofTV
IN
Cable box
Notes on Using This Connection
Use the cable box Tune the TV to the channel the cable box is set to (usually channel 3
or 4) and then use the cable box to switch channels.
Set up the TV remote control to operate the cable Program the remote control. See "Programnaing the Remote
box Control" on page 47.
Activate the remote control to operate the cable Press SAT/CABLE (FUNCTION) once, and the SAT/CABLE
box indicator lights up.
Prevent the accidental switching of TV channels When using the cable box, ensure that the TV remains tuned to the
channel that the cable box is set to (nsually channel 3 or 4).
24