Changing All The At-90 Settings At Once (Registration); How To Use The Manual Dutton, Uri Ita Ar - Roland AT90 Owner's Manual

In the above ways, you can use the AT-90 for even more musical enjoyment by sim-
ply playing a chord in the lower keyboard, and using the To Variation, To Original,
Variation, Advanced, Break, and Intro/Ending buttons.
* While the Intro or Ending is being played, playing the lower keyboard will not pro-
duce sound (play voices).
Changing all the AT-90 settings at once (Registration)
26
The AT-90 has a "Registration" function that allows you to record panel settings
and recall those settings with a single press of a button.
It is convenient to use this function when you wish to make many changes in panel
settings as you play, or when you wish to reproduce a complex panel setting at a
later time. Up to 12 panel settings can be recorded.
@ Storing Registrations
St Gt) o opoo
1. Make all the panel settings that you wish to have stored.
2. While holding down the Write button, press a button from 1 to 12.
* Stored settings will be retained in memory even after the main power is turned off.
* Sets of Registrations can be saved onto floppy disk. The complete group of settings
stored for buttons 1-12, considered as one set, can be stored on a disk. (—p.46)
€ How to call up settings
To call up settings for everything other than rhythm performances and automatic
accompaniment:
<> Press a button from 1 to 12.
The indicator lights, and the settings for everything (other than a rhythm perfor-
mances and automatic accompaniment) are instantly recalled.
To call up settings that include data about rhythm performances and automatic
accompaniment:
* Continue holding a button for several seconds from 1 to 12 until the buttons related
to rhythm performances and automatic accompaniment flash.
* It is possible to shorten the time required for recalling settings that include those
related to rhythm and automatic accompaniment play. (p.53)
€ How to use the Manual button
When the Manual button is ON (lit), all panel settings you make will be stored automat-
ically as they are made, thus updating the Registration that had been previously saved.