Table of Contents
Advertisement
O Quantize (correct timing inaccuracies)
Quantize is a function that corrects the timing of _
notes to a specified interval.
1. Press the Function button.
2. Use the Select buttons to select "Edit Menu" and
press the Rec button.
3. Use the Select buttons to select "Quantize" and
press the Rec button.
4. Use the Bwd/Fwd buttons to select the track
whose data you wish to quantize, and press the
Rec button.
Settings : RHYTHM, ACCOMP, BASS, LOWER,
UPPER, SOLO, ALL
If you select ALL, data of all tracks will be quan-
tized.
5. Specify the area that will be quantized. Use the
Bwd/Fwd buttons to set the values, and use the
Rec/Reset buttons to switch between pages of
the screen.
The following items can be set.
from:
beginning measure
for :
number of measures from the begin-
ning measure
Res:
timing to which notes will be correct-
ed (Resolution)
For example if you want to quantize the notes of
measures
4-12 to the nearest 16th note, set
"from: 4 for: 9 Res: A".
To specify the data to the last measure, set "for:
ALL".
"Res" (Resolution) can be set to the following
values.
¿ Half note
J Quarter note
A 8th note triplet
A 16th note
Ti 16th note triplet
A 32nd note
After setting "Res," press the Rec button and the
following display will appear.
J 3 Quarter note triplet
> 8th note
6. To execute the Quantize function, press the Rec
button once again.
When
quantization is completed,
the basic
screen will reappear.
To cancel the operation, press the Reset button.
@ Channel Mute
This function allows you to mute performance
data on an individual channel basis.
* Channel Mute is effective only while the menu
is displayed.
1. Press the Function button.
2. Press the Select buttons to select "Ch. Mute."
3. Using the Bwd/Fwd buttons, select the channel
you wish to Mute.
From the left, they are: 1Ch, 2Ch.....15Ch, 16Ch.
4. Press the Rec button.
4
n
The number changes to
muted.
showing that it is
The mute function can be released by pressing
the Rec button again.
When you press the Function button or the
Display /Exit button, you will return to the basic
screen and the Channel Mute function will be
turned off.
58
Advertisement
Table of Contents
