Table of Contents
Advertisement
User Manual IO-Link Slave / Modbus Master
Document code: MN67961_ENG
Revision 1.000
Page 10 of 33
Industrial Electronic Devices
IO-LINK:
IO-Link is the first globally standardized IO technology (IEC 61131-9) that communicates from the controller down to the lowest automation
level. This universally applicable interface is a fieldbus-neutral point-to-point connection which uses standard unshielded cables. IO-Link
sends all the sensor and actuator signals to the controller and in turn carries controller data to the sensor/actuator level with revolutionary
consequences.
It is possible to have IO-Link device of two different type: IO-Link Class A and IO-Link Class B. ADFweb.com's converters can manage both
of them in relation to the product code selected.
In both cases, the power supply is taken directly from IO-Link interface and it has a maximum consumption of 2 W (80 mA).
IO-L
C
A:
INK
LASS
IO-Link Class A devices uses 3 pins on connectors.
ADFweb.com S.r.l.
Advertisement
Table of Contents
Need help?
Do you have a question about the HD67961-2-B2-IA and is the answer not in the manual?